| Property | Value |
|---|---|
| OID | 7ffffc4d.7fffdd19.7fffdd17 |
| Description | |
| Label | device_index |
| Type | node |
| Format | N |
| Flags |
|
| Child | Description |
|---|---|
| dev.ath.0.hal | Atheros HAL parameters |
| dev.ath.0.stats | Statistics |
| dev.ath.0.clear_stats | clear stats |
| dev.ath.0.txq_node_maxdepth | Maximum buffer depth for a single node |
| dev.ath.0.txq_mcastq_maxdepth | Maximum buffer depth for multicast/broadcast frames |
| dev.ath.0.txq_data_minfree | Minimum free buffers before adding a data frame to the TX queue |
| dev.ath.0.delim_min_pad | Enforce a minimum number of delimiters per A-MPDU sub-frame |
| dev.ath.0.rts_aggr_limit | Maximum A-MPDU size for RTS-protected frames, or '0' for default |
| dev.ath.0.aggr_limit | Maximum A-MPDU size, or 0 for 'default' |
| dev.ath.0.tid_hwq_hi | |
| dev.ath.0.tid_hwq_lo | |
| dev.ath.0.hwq_limit_aggr | Hardware AMPDU queue depth before software-queuing TX frames |
| dev.ath.0.hwq_limit_nonaggr | Hardware non-AMPDU queue depth before software-queuing TX frames |
| dev.ath.0.monpass | mask of error frames to pass when monitoring |
| dev.ath.0.intmit | interference mitigation |
| dev.ath.0.hangcheck | |
| dev.ath.0.forcebstuck | |
| dev.ath.0.txagg | |
| dev.ath.0.tpcts | tx power for cts frames |
| dev.ath.0.tpack | tx power for ack frames |
| dev.ath.0.tpc | enable/disable per-packet TPC |
| dev.ath.0.tpscale | tx power scaling |
| dev.ath.0.diag | h/w diagnostic control |
| dev.ath.0.txintrperiod | tx descriptor batching |
| dev.ath.0.rxantenna | default/rx antenna |
| dev.ath.0.txantenna | antenna switch |
| dev.ath.0.led_pwr_pin | MAC Power LED pin, or -1 to disable |
| dev.ath.0.led_net_pin | MAC Network LED pin, or -1 to disable |
| dev.ath.0.hardled | enable/disable hardware LED support |
| dev.ath.0.ledidle | idle time for inactivity LED (ticks) |
| dev.ath.0.ledon | setting to turn LED on |
| dev.ath.0.ledpin | GPIO pin connected to LED |
| dev.ath.0.softled | enable/disable software LED support |
| dev.ath.0.ctstimeout | 802.11 CTS timeout (us) |
| dev.ath.0.acktimeout | 802.11 ACK timeout (us) |
| dev.ath.0.slottime | 802.11 slot time (us) |
| dev.ath.0.regdomain | EEPROM regdomain code |
| dev.ath.0.countrycode | EEPROM country code |
| dev.ath.0.sample_stats | sample: print statistics |
| dev.ath.0.sample_rate | sample: percent air time devoted to sampling new rates (%%) |
| dev.ath.0.smoothing_rate | sample: smoothing rate for avg tx time (%%) |
| dev.ath.0.%parent | parent device |
| dev.ath.0.%pnpinfo | device identification |
| dev.ath.0.%location | device location relative to parent |
| dev.ath.0.%driver | device driver name |
| dev.ath.0.%desc | device description |